CREATE-ROUTINE-LOAD

CREATE-ROUTINE-LOAD

Name

CREATE ROUTINE LOAD

Description

The Routine Load function allows users to submit a resident import task, and import data into Doris by continuously reading data from a specified data source.

Currently, only data in CSV or Json format can be imported from Kakfa through unauthenticated or SSL authentication.

grammar:

CREATE ROUTINE LOAD [db.]job_name ON tbl_name
[merge_type]
[load_properties]
[job_properties]
FROM data_source [data_source_properties]
[COMMENT "comment"]

• [db.]job_name

  The name of the import job. Within the same database, only one job with the same name can be running.

• tbl_name

  Specifies the name of the table to be imported.

• merge_type

  Data merge type. The default is APPEND, which means that the imported data are ordinary append write operations. The MERGE and DELETE types are only available for Unique Key model tables. The MERGE type needs to be used with the [DELETE ON] statement to mark the Delete Flag column. The DELETE type means that all imported data are deleted data.

• load_properties

  Used to describe imported data. The composition is as follows:

  [column_separator],
  [columns_mapping],
  [preceding_filter],
  [where_predicates],
  [partitions],
  [DELETE ON],
  [ORDER BY]

  • column_separator

    Specifies the column separator, defaults to \t

    COLUMNS TERMINATED BY ","

  • columns_mapping

    It is used to specify the mapping relationship between file columns and columns in the table, as well as various column transformations. For a detailed introduction to this part, you can refer to the [Column Mapping, Transformation and Filtering] document.

    (k1, k2, tmpk1, k3 = tmpk1 + 1)

  • preceding_filter

    Filter raw data. For a detailed introduction to this part, you can refer to the [Column Mapping, Transformation and Filtering] document.

  • where_predicates

    Filter imported data based on conditions. For a detailed introduction to this part, you can refer to the [Column Mapping, Transformation and Filtering] document.

    WHERE k1 > 100 and k2 = 1000

  • partitions

    Specify in which partitions of the import destination table. If not specified, it will be automatically imported into the corresponding partition.

    PARTITION(p1, p2, p3)

  • DELETE ON

    It needs to be used with the MEREGE import mode, only for the table of the Unique Key model. Used to specify the columns and calculated relationships in the imported data that represent the Delete Flag.

    DELETE ON v3 >100

  • ORDER BY

    Tables only for the Unique Key model. Used to specify the column in the imported data that represents the Sequence Col. Mainly used to ensure data order when importing.

• job_properties

  Common parameters for specifying routine import jobs.

  PROPERTIES (
      "key1" = "val1",
      "key2" = "val2"
  )

  Currently we support the following parameters:

  1. desired_concurrent_number

     Desired concurrency. A routine import job will be divided into multiple subtasks for execution. This parameter specifies the maximum number of tasks a job can execute concurrently. Must be greater than 0. Default is 3.

     This degree of concurrency is not the actual degree of concurrency. The actual degree of concurrency will be comprehensively considered by the number of nodes in the cluster, the load situation, and the situation of the data source.

     "desired_concurrent_number" = "3"

  2. max_batch_interval/max_batch_rows/max_batch_size

     These three parameters represent:

     1. The maximum execution time of each subtask, in seconds. The range is 5 to 60. Default is 10.
     2. The maximum number of lines read by each subtask. Must be greater than or equal to 200000. The default is 200000.
     3. The maximum number of bytes read by each subtask. The unit is bytes and the range is 100MB to 1GB. The default is 100MB.

     These three parameters are used to control the execution time and processing volume of a subtask. When either one reaches the threshold, the task ends.

     "max_batch_interval" = "20",
     "max_batch_rows" = "300000",
     "max_batch_size" = "209715200"

  3. max_error_number

     The maximum number of error lines allowed within the sampling window. Must be greater than or equal to 0. The default is 0, which means no error lines are allowed.

     The sampling window is max_batch_rows * 10. That is, if the number of error lines is greater than max_error_number within the sampling window, the routine operation will be suspended, requiring manual intervention to check data quality problems.

     Rows that are filtered out by where conditions are not considered error rows.

  4. strict_mode

     Whether to enable strict mode, the default is off. If enabled, the column type conversion of non-null raw data will be filtered if the result is NULL. Specify as:

     "strict_mode" = "true"

     The strict mode mode means strict filtering of column type conversions during the load process. The strict filtering strategy is as follows:

     1. For column type conversion, if strict mode is true, the wrong data will be filtered. The error data here refers to the fact that the original data is not null, and the result is a null value after participating in the column type conversion.
     2. When a loaded column is generated by a function transformation, strict mode has no effect on it.
     3. For a column type loaded with a range limit, if the original data can pass the type conversion normally, but cannot pass the range limit, strict mode will not affect it. For example, if the type is decimal(1,0) and the original data is 10, it is eligible for type conversion but not for column declarations. This data strict has no effect on it.

     strict mode and load relationship of source data

     Here is an example of a column type of TinyInt.

     Note: When a column in a table allows a null value to be loaded

     source data	source data example	string to int	strict_mode	result
     null	\N	N/A	true or false	NULL
     not null	aaa or 2000	NULL	true	invalid data(filtered)
     not null	aaa	NULL	false	NULL
     not null	1	1	true or false	correct data

     Here the column type is Decimal(1,0)

     Note: When a column in a table allows a null value to be loaded

     source data	source data example	string to int	strict_mode	result
     null	\N	N/A	true or false	NULL
     not null	aaa	NULL	true	invalid data(filtered)
     not null	aaa	NULL	false	NULL
     not null	1 or 10	1	true or false	correct data

     Note: 10 Although it is a value that is out of range, because its type meets the requirements of decimal, strict mode has no effect on it. 10 will eventually be filtered in other ETL processing flows. But it will not be filtered by strict mode.

  5. timezone

     Specifies the time zone used by the import job. The default is to use the Session's timezone parameter. This parameter affects the results of all time zone-related functions involved in the import.

  6. format

     Specify the import data format, the default is csv, and the json format is supported.

  7. jsonpaths

     When the imported data format is json, the fields in the Json data can be extracted by specifying jsonpaths.

     -H "jsonpaths: [\"$.k2\", \"$.k1\"]"

  8. strip_outer_array

     When the imported data format is json, strip_outer_array is true, indicating that the Json data is displayed in the form of an array, and each element in the data will be regarded as a row of data. The default value is false.

     -H "strip_outer_array: true"

  9. json_root

     When the import data format is json, you can specify the root node of the Json data through json_root. Doris will extract the elements of the root node through json_root for parsing. Default is empty.

     -H "json_root: $.RECORDS"

  10. send_batch_parallelism

  Integer, Used to set the default parallelism for sending batch, if the value for parallelism exceed max_send_batch_parallelism_per_job in BE config, then the coordinator BE will use the value of max_send_batch_parallelism_per_job.

  11. load_to_single_tablet Boolean type, True means that one task can only load data to one tablet in the corresponding partition at a time. The default value is false. This parameter can only be set when loading data into the OLAP table with random partition.

• FROM data_source [data_source_properties]

  The type of data source. Currently supports:

  FROM KAFKA
  (
      "key1" = "val1",
      "key2" = "val2"
  )

  data_source_properties supports the following data source properties:

  1. kafka_broker_list

     Kafka's broker connection information. The format is ip:host. Separate multiple brokers with commas.

     "kafka_broker_list" = "broker1:9092,broker2:9092"

  2. kafka_topic

     Specifies the Kafka topic to subscribe to.

     "kafka_topic" = "my_topic"

  3. kafka_partitions/kafka_offsets

     Specify the kafka partition to be subscribed to, and the corresponding starting offset of each partition. If a time is specified, consumption will start at the nearest offset greater than or equal to the time.

     offset can specify a specific offset from 0 or greater, or:

     • OFFSET_BEGINNING: Start subscription from where there is data.
     • OFFSET_END: subscribe from the end.
     • Time format, such as: "2021-05-22 11:00:00"

     If not specified, all partitions under topic will be subscribed from OFFSET_END by default.

     "kafka_partitions" = "0,1,2,3",
     "kafka_offsets" = "101,0,OFFSET_BEGINNING,OFFSET_END"

     "kafka_partitions" = "0,1,2,3",
     "kafka_offsets" = "2021-05-22 11:00:00,2021-05-22 11:00:00,2021-05-22 11:00:00"

     Note that the time format cannot be mixed with the OFFSET format.

  4. property

     Specify custom kafka parameters. The function is equivalent to the "--property" parameter in the kafka shell.

     When the value of the parameter is a file, you need to add the keyword: "FILE:" before the value.

     For how to create a file, please refer to the CREATE FILE command documentation.

     For more supported custom parameters, please refer to the configuration items on the client side in the official CONFIGURATION document of librdkafka. Such as:

     "property.client.id" = "12345",
     "property.ssl.ca.location" = "FILE:ca.pem"

     1. When connecting to Kafka using SSL, you need to specify the following parameters:

        "property.security.protocol" = "ssl",
        "property.ssl.ca.location" = "FILE:ca.pem",
        "property.ssl.certificate.location" = "FILE:client.pem",
        "property.ssl.key.location" = "FILE:client.key",
        "property.ssl.key.password" = "abcdefg"

        in:

        property.security.protocol and property.ssl.ca.location are required to indicate the connection method is SSL and the location of the CA certificate.

        If client authentication is enabled on the Kafka server side, thenAlso set:

        "property.ssl.certificate.location"
        "property.ssl.key.location"
        "property.ssl.key.password"

        They are used to specify the client's public key, private key, and password for the private key, respectively.

     2. Specify the default starting offset of the kafka partition

        If kafka_partitions/kafka_offsets is not specified, all partitions are consumed by default.

        At this point, you can specify kafka_default_offsets to specify the starting offset. Defaults to OFFSET_END, i.e. subscribes from the end.

        Example:

        "property.kafka_default_offsets" = "OFFSET_BEGINNING"

• SinceVersion 1.2.3 comment Comment for the routine load job.

Example

1. Create a Kafka routine import task named test1 for example_tbl of example_db. Specify the column separator and group.id and client.id, and automatically consume all partitions by default, and start subscribing from the location where there is data (OFFSET_BEGINNING)

   CREATE ROUTINE LOAD example_db.test1 ON example_tbl
   COLUMNS TERMINATED BY ",",
   COLUMNS(k1, k2, k3, v1, v2, v3 = k1 * 100)
   PROPERTIES
   (
       "desired_concurrent_number"="3",
       "max_batch_interval" = "20",
       "max_batch_rows" = "300000",
       "max_batch_size" = "209715200",
       "strict_mode" = "false"
   )
   FROM KAFKA
   (
       "kafka_broker_list" = "broker1:9092,broker2:9092,broker3:9092",
       "kafka_topic" = "my_topic",
       "property.group.id" = "xxx",
       "property.client.id" = "xxx",
       "property.kafka_default_offsets" = "OFFSET_BEGINNING"
   );

2. Create a Kafka routine import task named test1 for example_tbl of example_db. Import tasks are in strict mode.

   CREATE ROUTINE LOAD example_db.test1 ON example_tbl
   COLUMNS(k1, k2, k3, v1, v2, v3 = k1 * 100),
   PRECEDING FILTER k1 = 1,
   WHERE k1 > 100 and k2 like "%doris%"
   PROPERTIES
   (
       "desired_concurrent_number"="3",
       "max_batch_interval" = "20",
       "max_batch_rows" = "300000",
       "max_batch_size" = "209715200",
       "strict_mode" = "false"
   )
   FROM KAFKA
   (
       "kafka_broker_list" = "broker1:9092,broker2:9092,broker3:9092",
       "kafka_topic" = "my_topic",
       "kafka_partitions" = "0,1,2,3",
       "kafka_offsets" = "101,0,0,200"
   );

3. Import data from the Kafka cluster through SSL authentication. Also set the client.id parameter. The import task is in non-strict mode and the time zone is Africa/Abidjan

   CREATE ROUTINE LOAD example_db.test1 ON example_tbl
   COLUMNS(k1, k2, k3, v1, v2, v3 = k1 * 100),
   WHERE k1 > 100 and k2 like "%doris%"
   PROPERTIES
   (
       "desired_concurrent_number"="3",
       "max_batch_interval" = "20",
       "max_batch_rows" = "300000",
       "max_batch_size" = "209715200",
       "strict_mode" = "false",
       "timezone" = "Africa/Abidjan"
   )
   FROM KAFKA
   (
       "kafka_broker_list" = "broker1:9092,broker2:9092,broker3:9092",
       "kafka_topic" = "my_topic",
       "property.security.protocol" = "ssl",
       "property.ssl.ca.location" = "FILE:ca.pem",
       "property.ssl.certificate.location" = "FILE:client.pem",
       "property.ssl.key.location" = "FILE:client.key",
       "property.ssl.key.password" = "abcdefg",
       "property.client.id" = "my_client_id"
   );

4. Import data in Json format. By default, the field name in Json is used as the column name mapping. Specify to import three partitions 0, 1, and 2, and the starting offsets are all 0

   CREATE ROUTINE LOAD example_db.test_json_label_1 ON table1
   COLUMNS(category,price,author)
   PROPERTIES
   (
       "desired_concurrent_number"="3",
       "max_batch_interval" = "20",
       "max_batch_rows" = "300000",
       "max_batch_size" = "209715200",
       "strict_mode" = "false",
       "format" = "json"
   )
   FROM KAFKA
   (
       "kafka_broker_list" = "broker1:9092,broker2:9092,broker3:9092",
       "kafka_topic" = "my_topic",
       "kafka_partitions" = "0,1,2",
       "kafka_offsets" = "0,0,0"
   );

5. Import Json data, extract fields through Jsonpaths, and specify the root node of the Json document

   CREATE ROUTINE LOAD example_db.test1 ON example_tbl
   COLUMNS(category, author, price, timestamp, dt=from_unixtime(timestamp, '%Y%m%d'))
   PROPERTIES
   (
       "desired_concurrent_number"="3",
       "max_batch_interval" = "20",
       "max_batch_rows" = "300000",
       "max_batch_size" = "209715200",
       "strict_mode" = "false",
       "format" = "json",
       "jsonpaths" = "[\"$.category\",\"$.author\",\"$.price\",\"$.timestamp\"]",
       "json_root" = "$.RECORDS"
       "strip_outer_array" = "true"
   )
   FROM KAFKA
   (
       "kafka_broker_list" = "broker1:9092,broker2:9092,broker3:9092",
       "kafka_topic" = "my_topic",
       "kafka_partitions" = "0,1,2",
       "kafka_offsets" = "0,0,0"
   );

6. Create a Kafka routine import task named test1 for example_tbl of example_db. And use conditional filtering.

   CREATE ROUTINE LOAD example_db.test1 ON example_tbl
   WITH MERGE
   COLUMNS(k1, k2, k3, v1, v2, v3),
   WHERE k1 > 100 and k2 like "%doris%",
   DELETE ON v3 >100
   PROPERTIES
   (
       "desired_concurrent_number"="3",
       "max_batch_interval" = "20",
       "max_batch_rows" = "300000",
       "max_batch_size" = "209715200",
       "strict_mode" = "false"
   )
   FROM KAFKA
   (
       "kafka_broker_list" = "broker1:9092,broker2:9092,broker3:9092",
       "kafka_topic" = "my_topic",
       "kafka_partitions" = "0,1,2,3",
       "kafka_offsets" = "101,0,0,200"
   );

7. Import data to Unique with sequence column Key model table

   CREATE ROUTINE LOAD example_db.test_job ON example_tbl
   COLUMNS TERMINATED BY ",",
   COLUMNS(k1,k2,source_sequence,v1,v2),
   ORDER BY source_sequence
   PROPERTIES
   (
       "desired_concurrent_number"="3",
       "max_batch_interval" = "30",
       "max_batch_rows" = "300000",
       "max_batch_size" = "209715200"
   ) FROM KAFKA
   (
       "kafka_broker_list" = "broker1:9092,broker2:9092,broker3:9092",
       "kafka_topic" = "my_topic",
       "kafka_partitions" = "0,1,2,3",
       "kafka_offsets" = "101,0,0,200"
   );

8. Consume from a specified point in time

   CREATE ROUTINE LOAD example_db.test_job ON example_tbl
   PROPERTIES
   (
       "desired_concurrent_number"="3",
       "max_batch_interval" = "30",
       "max_batch_rows" = "300000",
       "max_batch_size" = "209715200"
   ) FROM KAFKA
   (
       "kafka_broker_list" = "broker1:9092,broker2:9092",
       "kafka_topic" = "my_topic",
       "kafka_default_offset" = "2021-05-21 10:00:00"
   );

Keywords

CREATE, ROUTINE, LOAD, CREATE LOAD

Best Practice

Partition and Offset for specified consumption

Doris supports the specified Partition and Offset to start consumption, and also supports the function of consumption at a specified time point. The configuration relationship of the corresponding parameters is described here.

There are three relevant parameters:

• kafka_partitions: Specify a list of partitions to be consumed, such as "0, 1, 2, 3".
• kafka_offsets: Specify the starting offset of each partition, which must correspond to the number of kafka_partitions list. For example: "1000, 1000, 2000, 2000"
• property.kafka_default_offset: Specifies the default starting offset of the partition.

When creating an import job, these three parameters can have the following combinations:

Composition	kafka_partitions	kafka_offsets	property.kafka_default_offset	Behavior
1	No	No	No	The system will automatically find all partitions corresponding to the topic and start consumption from OFFSET_END
2	No	No	Yes	The system will automatically find all partitions corresponding to the topic and start consumption from the location specified by default offset
3	Yes	No	No	The system will start consumption from OFFSET_END of the specified partition
4	Yes	Yes	No	The system will start consumption from the specified offset of the specified partition
5	Yes	No	Yes	The system will start consumption from the specified partition, the location specified by default offset