Variable
This document focuses on currently supported variables.
Variables in Doris refer to variable settings in MySQL. However, some of the variables are only used to be compatible with some MySQL client protocols, and do not produce their actual meaning in the MySQL database.
Variable setting and viewingβ
Viewβ
All or specified variables can be viewed via SHOW VARIABLES [LIKE 'xxx'];
. Such as:
SHOW VARIABLES;
SHOW VARIABLES LIKE '%time_zone%';
Settingsβ
Note that before version 1.1, after the setting takes effect globally, the setting value will be inherited in subsequent new session connections, but the value in the current session will remain unchanged. After version 1.1 (inclusive), after the setting takes effect globally, the setting value will be used in subsequent new session connections, and the value in the current session will also change.
For session-only, set by the SET var_name=xxx;
statement. Such as:
SET exec_mem_limit = 137438953472;
SET forward_to_master = true;
SET time_zone = "Asia/Shanghai";
For global-level, set by SET GLOBAL var_name=xxx;
. Such as:
SET GLOBAL exec_mem_limit = 137438953472
Note 1: Only ADMIN users can set variable at global-level.
Variables that support both session-level and global-level setting include:
time_zone
wait_timeout
sql_mode
enable_profile
query_timeout
insert_timeout
exec_mem_limit
batch_size
parallel_fragment_exec_instance_num
parallel_exchange_instance_num
allow_partition_column_nullable
insert_visible_timeout_ms
enable_fold_constant_by_be
Variables that support only global-level setting include:
default_rowset_type
default_password_lifetime
password_history
validate_password_policy
At the same time, variable settings also support constant expressions. Such as:
SET exec_mem_limit = 10 * 1024 * 1024 * 1024;
SET forward_to_master = concat('tr', 'u', 'e');
Set variables in the query statementβ
In some scenarios, we may need to set variables specifically for certain queries. The SET_VAR hint sets the session value of a system variable temporarily (for the duration of a single statement). Examples:
SELECT /*+ SET_VAR(exec_mem_limit = 8589934592) */ name FROM people ORDER BY name;
SELECT /*+ SET_VAR(query_timeout = 1, enable_partition_cache=true) */ sleep(3);
Note that the comment must start with /*+ and can only follow the SELECT.
Supported variablesβ
-
SQL_AUTO_IS_NULL
Used for compatible JDBC connection pool C3P0. No practical effect.
-
auto_increment_increment
Used for compatibility with MySQL clients. No practical effect. Although Doris already has AUTO_INCREMENT feature, but this parameter does not affect the behavior of 'AUTO_INCREMENT'. Same as auto_increment_offset.
-
autocommit
Used for compatibility with MySQL clients. No practical effect.
-
auto_broadcast_join_threshold
The maximum size in bytes of the table that will be broadcast to all nodes when a join is performed, broadcast can be disabled by setting this value to -1.
The system provides two join implementation methods,
broadcast join
andshuffle join
.broadcast join
means that after conditional filtering the small table, broadcast it to each node where the large table is located to form an in-memory Hash table, and then stream the data of the large table for Hash Join.shuffle join
refers to hashing both small and large tables according to the join key, and then performing distributed join.broadcast join
has better performance when the data volume of the small table is small. On the contrary, shuffle join has better performance.The system will automatically try to perform a Broadcast Join, or you can explicitly specify the implementation of each join operator. The system provides a configurable parameter
auto_broadcast_join_threshold
, which specifies the upper limit of the memory used by the hash table to the overall execution memory whenbroadcast join
is used. The value ranges from 0 to 1, and the default value is 0.8. When the memory used by the system to calculate the hash table exceeds this limit, it will automatically switch to usingshuffle join
The overall execution memory here is: a fraction of what the query optimizer estimates
Note:
It is not recommended to use this parameter to adjust, if you must use a certain join, it is recommended to use hint, such as join[shuffle]
-
batch_size
Used to specify the number of rows of a single packet transmitted by each node during query execution. By default, the number of rows of a packet is 1024 rows. That is, after the source node generates 1024 rows of data, it is packaged and sent to the destination node.
A larger number of rows will increase the throughput of the query in the case of scanning large data volumes, but may increase the query delay in small query scenario. At the same time, it also increases the memory overhead of the query. The recommended setting range is 1024 to 4096.
-
character_set_client
Used for compatibility with MySQL clients. No practical effect.
-
character_set_connection
Used for compatibility with MySQL clients. No practical effect.
-
character_set_results
Used for compatibility with MySQL clients. No practical effect.
-
character_set_server
Used for compatibility with MySQL clients. No practical effect.
-
codegen_level
Used to set the level of LLVM codegen. (Not currently in effect).
-
collation_connection
Used for compatibility with MySQL clients. No practical effect.
-
collation_database
Used for compatibility with MySQL clients. No practical effect.
-
collation_server
Used for compatibility with MySQL clients. No practical effect.
-
have_query_cache
Used for compatibility with MySQL clients. No practical effect.
-
default_order_by_limit
Used to control the default number of items returned after OrderBy. The default value is -1, and the maximum number of records after the query is returned by default, and the upper limit is the MAX_VALUE of the long data type.
-
delete_without_partition
When set to true. When using the delete command to delete partition table data, no partition is required. The delete operation will be automatically applied to all partitions.
Note, however, that the automatic application to all partitions may cause the delete command to take a long time to trigger a large number of subtasks and cause a long time. If it is not necessary, it is not recommended to turn it on.
-
disable_colocate_join
Controls whether the Colocation Join function is enabled. The default is false, which means that the feature is enabled. True means that the feature is disabled. When this feature is disabled, the query plan will not attempt to perform a Colocation Join.
-
enable_bucket_shuffle_join
Controls whether the Bucket Shuffle Join function is enabled. The default is true, which means that the feature is enabled. False means that the feature is disabled. When this feature is disabled, the query plan will not attempt to perform a Bucket Shuffle Join.
-
disable_streaming_preaggregations
Controls whether streaming pre-aggregation is turned on. The default is false, which is enabled. Currently not configurable and enabled by default.
-
enable_insert_strict
Used to set the
strict
mode when loading data via INSERT statement. The default is false, which means that thestrict
mode is not turned on. For an introduction to this mode, see here. -
enable_spilling
Used to set whether to enable external sorting. The default is false, which turns off the feature. This feature is enabled when the user does not specify a LIMIT condition for the ORDER BY clause and also sets
enable_spilling
to true. When this feature is enabled, the temporary data is stored in thedoris-scratch/
directory of the BE data directory and the temporary data is cleared after the query is completed.This feature is mainly used for sorting operations with large amounts of data using limited memory.
Note that this feature is experimental and does not guarantee stability. Please turn it on carefully.
-
exec_mem_limit
Used to set the memory limit for a single query. The default is 2GB, you can set it in B/K/KB/M/MB/G/GB/T/TB/P/PB, the default is B.
This parameter is used to limit the memory that can be used by an instance of a single query fragment in a query plan. A query plan may have multiple instances, and a BE node may execute one or more instances. Therefore, this parameter does not accurately limit the memory usage of a query across the cluster, nor does it accurately limit the memory usage of a query on a single BE node. The specific needs need to be judged according to the generated query plan.
Usually, only some blocking nodes (such as sorting node, aggregation node, and join node) consume more memory, while in other nodes (such as scan node), data is streamed and does not occupy much memory.
When a
Memory Exceed Limit
error occurs, you can try to increase the parameter exponentially, such as 4G, 8G, 16G, and so on.It should be noted that this value may fluctuate by a few MB.
-
forward_to_master
The user sets whether to forward some commands to the Master FE node for execution. The default is
true
, which means forwarding. There are multiple FE nodes in Doris, one of which is the Master node. Usually users can connect to any FE node for full-featured operation. However, some of detail information can only be obtained from the Master FE node.For example, the
SHOW BACKENDS;
command, if not forwarded to the Master FE node, can only see some basic information such as whether the node is alive, and forwarded to the Master FE to obtain more detailed information including the node startup time and the last heartbeat time.The commands currently affected by this parameter are as follows:
-
SHOW FRONTEND;
Forward to Master to view the last heartbeat information.
-
SHOW BACKENDS;
Forward to Master to view startup time, last heartbeat information, and disk capacity information.
-
SHOW BROKERS;
Forward to Master to view the start time and last heartbeat information.
-
SHOW TABLET;
/ADMIN SHOW REPLICA DISTRIBUTION;
/ADMIN SHOW REPLICA STATUS;
Forward to Master to view the tablet information stored in the Master FE metadata. Under normal circumstances, the tablet information in different FE metadata should be consistent. When a problem occurs, this method can be used to compare the difference between the current FE and Master FE metadata.
-
SHOW PROC;
Forward to Master to view information about the relevant PROC stored in the Master FE metadata. Mainly used for metadata comparison.
-
-
init_connect
Used for compatibility with MySQL clients. No practical effect.
-
interactive_timeout
Used for compatibility with MySQL clients. No practical effect.
-
enable_profile
Used to set whether you need to view the profile of the query. The default is false, which means no profile is required.
By default, the BE sends a profile to the FE for viewing errors only if an error occurs in the query. A successful query will not send a profile. Sending a profile will incur a certain amount of network overhead, which is detrimental to a high concurrent query scenario.
When the user wants to analyze the profile of a query, the query can be sent after this variable is set to true. After the query is finished, you can view the profile on the web page of the currently connected FE:
fe_host:fe_http:port/query
It will display the most recent 100 queries which
enable_profile
is set to true. -
language
Used for compatibility with MySQL clients. No practical effect.
-
license
Show Doris's license. No other effect.
-
lower_case_table_names
Used to control whether the user table name is case-sensitive.
A value of 0 makes the table name case-sensitive. The default is 0.
When the value is 1, the table name is case insensitive. Doris will convert the table name to lowercase when storing and querying.
The advantage is that any case of table name can be used in one statement. The following SQL is correct:mysql> show tables;
+------------------+
| Tables_ in_testdb|
+------------------+
| cost |
+------------------+
mysql> select * from COST where COst.id < 100 order by cost.id;The disadvantage is that the table name specified in the table creation statement cannot be obtained after table creation. The table name viewed by 'show tables' is lower case of the specified table name.
When the value is 2, the table name is case insensitive. Doris stores the table name specified in the table creation statement and converts it to lowercase for comparison during query.
The advantage is that the table name viewed by 'show tables' is the table name specified in the table creation statement;
The disadvantage is that only one case of table name can be used in the same statement. For example, the table name 'cost' can be used to query the 'cost' table:mysql> select * from COST where COST.id < 100 order by COST.id;
This variable is compatible with MySQL and must be configured at cluster initialization by specifying
lower_case_table_names=
in fe.conf. It cannot be modified by theset
statement after cluster initialization is complete, nor can it be modified by restarting or upgrading the cluster.The system view table names in information_schema are case-insensitive and behave as 2 when the value of
lower_case_table_names
is 0. -
max_allowed_packet
For compatibility with JDBC connection pool C3P0. Has no real effect on Doris itself. If you encounter the error
Packet for query is too large (1,514,085 > 1,048,576). You can change this value on the server by setting the 'max_allowed_packet' variable.
, you can useset GLOBAL max_allowed_packet = 1548576
to increase the value. -
max_pushdown_conditions_per_column
For the specific meaning of this variable, please refer to the description of
max_pushdown_conditions_per_column
in BE Configuration. This variable is set to -1 by default, which means that the configuration value inbe.conf
is used. If the setting is greater than 0, the query in the current session will use the variable value, and ignore the configuration value inbe.conf
. -
max_scan_key_num
For the specific meaning of this variable, please refer to the description of
doris_max_scan_key_num
in BE Configuration. This variable is set to -1 by default, which means that the configuration value inbe.conf
is used. If the setting is greater than 0, the query in the current session will use the variable value, and ignore the configuration value inbe.conf
. -
net_buffer_length
Used for compatibility with MySQL clients. No practical effect.
-
net_read_timeout
Used for compatibility with MySQL clients. No practical effect.
-
net_write_timeout
Used for compatibility with MySQL clients. No practical effect.
-
parallel_exchange_instance_num
Used to set the number of exchange nodes used by an upper node to receive data from the lower node in the execution plan. The default is -1, which means that the number of exchange nodes is equal to the number of execution instances of the lower nodes (default behavior). When the setting is greater than 0 and less than the number of execution instances of the lower node, the number of exchange nodes is equal to the set value.
In a distributed query execution plan, the upper node usually has one or more exchange nodes for receiving data from the execution instances of the lower nodes on different BEs. Usually the number of exchange nodes is equal to the number of execution instances of the lower nodes.
In some aggregate query scenarios, if the amount of data to be scanned at the bottom is large, but the amount of data after aggregation is small, you can try to modify this variable to a smaller value, which can reduce the resource overhead of such queries. Such as the scenario of aggregation query on the DUPLICATE KEY data model.
-
parallel_fragment_exec_instance_num
For the scan node, set its number of instances to execute on each BE node. The default is 1.
A query plan typically produces a set of scan ranges, the range of data that needs to be scanned. These data are distributed across multiple BE nodes. A BE node will have one or more scan ranges. By default, a set of scan ranges for each BE node is processed by only one execution instance. When the machine resources are abundant, you can increase the variable and let more execution instances process a set of scan ranges at the same time, thus improving query efficiency.
The number of scan instances determines the number of other execution nodes in the upper layer, such as aggregate nodes and join nodes. Therefore, it is equivalent to increasing the concurrency of the entire query plan execution. Modifying this parameter will help improve the efficiency of large queries, but larger values will consume more machine resources, such as CPU, memory, and disk IO.
-
query_cache_size
Used for compatibility with MySQL clients. No practical effect.
-
query_cache_type
Used for compatible JDBC connection pool C3P0. No practical effect.
-
query_timeout
Used to set the query timeout. This variable applies to all query statements in the current connection. Particularly, timeout of INSERT statements is recommended to be managed by the insert_timeout below. The default is 15 minutes, in seconds.
-
insert_timeout
Used to set the insert timeout. This variable applies to INSERT statements particularly in the current connection, and is recommended to manage long-duration INSERT action. The default is 4 hours, in seconds. It will lose effect when query_timeout is greater than itself to make it compatible with the habits of older version users to use query_timeout to control the timeout of INSERT statements.
-
resource_group
Not used.
-
send_batch_parallelism
Used to set the default parallelism for sending batch when execute InsertStmt operation, if the value for parallelism exceed
max_send_batch_parallelism_per_job
in BE config, then the coordinator BE will use the value ofmax_send_batch_parallelism_per_job
. -
sql_mode
Used to specify SQL mode to accommodate certain SQL dialects. For the SQL mode, see here.
-
sql_safe_updates
Used for compatibility with MySQL clients. No practical effect.
-
sql_select_limit
Used to limit return rows of select stmt, including select clause of insert stmt.
-
system_time_zone
Set to the current system time zone when the cluster is initialised. It cannot be changed.
-
time_zone
Used to set the time zone for the current session. Defaults to the value of
system_time_zone
. It affects the results of certain time functions. For more information, see the time zone documentation. -
tx_isolation
Used for compatibility with MySQL clients. No practical effect.
-
tx_read_only
Used for compatibility with MySQL clients. No practical effect.
-
transaction_read_only
Used for compatibility with MySQL clients. No practical effect.
-
transaction_isolation
Used for compatibility with MySQL clients. No practical effect.
-
version
Used for compatibility with MySQL clients. No practical effect.
-
performance_schema
Used for compatibility with MySQL JDBC 8.0.16 or later version. No practical effect.
-
version_comment
Used to display the version of Doris. Cannot be changed.
-
wait_timeout
The length of the connection used to set up an idle connection. When an idle connection does not interact with Doris for that length of time, Doris will actively disconnect the link. The default is 8 hours, in seconds.
-
default_rowset_type
Used for setting the default storage format of Backends storage engine. Valid options: alpha/beta
-
use_v2_rollup
Used to control the sql query to use segment v2 rollup index to get data. This variable is only used for validation when upgrading to segment v2 feature. Otherwise, not recommended to use.
-
rewrite_count_distinct_to_bitmap_hll
Whether to rewrite count distinct queries of bitmap and HLL types as bitmap_union_count and hll_union_agg.
-
prefer_join_method
When choosing the join method(broadcast join or shuffle join), if the broadcast join cost and shuffle join cost are equal, which join method should we prefer.
Currently, the optional values for this variable are "broadcast" or "shuffle".
-
allow_partition_column_nullable
Whether to allow the partition column to be NULL when creating the table. The default is true, which means NULL is allowed. false means the partition column must be defined as NOT NULL.
-
insert_visible_timeout_ms
When execute insert statement, doris will wait for the transaction to commit and visible after the import is completed. This parameter controls the timeout of waiting for transaction to be visible. The default value is 10000, and the minimum value is 1000.
-
enable_exchange_node_parallel_merge
In a sort query, when an upper level node receives the ordered data of the lower level node, it will sort the corresponding data on the exchange node to ensure that the final data is ordered. However, when a single thread merges multiple channels of data, if the amount of data is too large, it will lead to a single point of exchange node merge bottleneck.
Doris optimizes this part if there are too many data nodes in the lower layer. Exchange node will start multithreading for parallel merging to speed up the sorting process. This parameter is false by default, which means that exchange node does not adopt parallel merge sort to reduce the extra CPU and memory consumption.
-
extract_wide_range_expr
Used to control whether turn on the 'Wide Common Factors' rule. The value has two: true or false. On by default.
-
enable_fold_constant_by_be
Used to control the calculation method of constant folding. The default is
false
, that is, calculation is performed inFE
; if it is set totrue
, it will be calculated byBE
throughRPC
request. -
cpu_resource_limit
Used to limit the resource overhead of a query. This is an experimental feature. The current implementation is to limit the number of scan threads for a query on a single node. The number of scan threads is limited, and the data returned from the bottom layer slows down, thereby limiting the overall computational resource overhead of the query. Assuming it is set to 2, a query can use up to 2 scan threads on a single node.
This parameter will override the effect of
parallel_fragment_exec_instance_num
. That is, assuming thatparallel_fragment_exec_instance_num
is set to 4, and this parameter is set to 2. Then 4 execution instances on a single node will share up to 2 scanning threads.This parameter will be overridden by the
cpu_resource_limit
configuration in the user property.The default is -1, which means no limit.
-
disable_join_reorder
Used to turn off all automatic join reorder algorithms in the system. There are two values: true and false.It is closed by default, that is, the automatic join reorder algorithm of the system is adopted. After set to true, the system will close all automatic sorting algorithms, adopt the original SQL table order, and execute join
-
enable_infer_predicate
Used to control whether to perform predicate derivation. There are two values: true and false. It is turned off by default, that is, the system does not perform predicate derivation, and uses the original predicate to perform related operations. After it is set to true, predicate expansion is performed.
-
return_object_data_as_binary
Used to identify whether to return the bitmap/hll result in the select result. In the select into outfile statement, if the export file format is csv, the bimap/hll data will be base64-encoded, if it is the parquet file format, the data will be stored as a byte array. Below will be an example of Java, more examples can be found in samples.try (Connection conn = DriverManager.getConnection("jdbc:mysql://127.0.0.1:9030/test?user=root");
Statement stmt = conn.createStatement()
) {
stmt.execute("set return_object_data_as_binary=true"); // IMPORTANT!!!
ResultSet rs = stmt.executeQuery("select uids from t_bitmap");
while(rs.next()){
byte[] bytes = rs.getBytes(1);
RoaringBitmap bitmap32 = new RoaringBitmap();
switch(bytes[0]) {
case 0: // for empty bitmap
break;
case 1: // for only 1 element in bitmap32
bitmap32.add(ByteBuffer.wrap(bytes,1,bytes.length-1)
.order(ByteOrder.LITTLE_ENDIAN)
.getInt());
break;
case 2: // for more than 1 elements in bitmap32
bitmap32.deserialize(ByteBuffer.wrap(bytes,1,bytes.length-1));
break;
// for more details, see https://github.com/apache/doris/tree/master/samples/read_bitmap
}
}
} -
block_encryption_mode
The block encryption mode can be controlled by this parameter, the default value is empty. When empty, using the AES algorithm is equivalent to usingAES_128_ECB
, and when using the SM4 algorithm is equivalent toSM4_128_ECB
.
Optional values:
AES_128_ECB,
AES_192_ECB,
AES_256_ECB,
AES_128_CBC,
AES_192_CBC,
AES_256_CBC,
AES_128_CFB,
AES_192_CFB,
AES_256_CFB,
AES_128_CFB1,
AES_192_CFB1,
AES_256_CFB1,
AES_128_CFB8,
AES_192_CFB8,
AES_256_CFB8,
AES_128_CFB128,
AES_192_CFB128,
AES_256_CFB128,
AES_128_CTR,
AES_192_CTR,
AES_256_CTR,
AES_128_OFB,
AES_192_OFB,
AES_256_OFB,
SM4_128_ECB,
SM4_128_CBC,
SM4_128_CFB128,
SM4_128_OFB,
SM4_128_CTR,
-
enable_infer_predicate
Used to control whether predicate deduction is performed. There are two values: true and false. It is turned off by default, and the system does not perform predicate deduction, and uses the original predicate for related operations. When set to true, predicate expansion occurs.
-
trim_tailing_spaces_for_external_table_query
Used to control whether trim the tailing spaces while quering Hive external tables. The default is false.
-
skip_storage_engine_merge
For debugging purpose. In vectorized execution engine, in case of problems of reading data of Aggregate Key model and Unique Key model, setting value to
true
will read data as Duplicate Key model. -
skip_delete_predicate
For debugging purpose. In vectorized execution engine, in case of problems of reading data, setting value to
true
will also read deleted data. -
skip_delete_bitmap
For debugging purpose. In Unique Key MoW table, in case of problems of reading data, setting value to
true
will also read deleted data. -
skip_missing_version
In some scenarios, all replicas of tablet are having missing versions, and the tablet is unable to recover. This config can control the behavior of query. When it is opened, the query will ignore the visible version recorded in FE partition, use the replica version. If the replica on be has missing versions, the query will directly skip this missing version, and only return the data of the existing version, In addition, the query will always try to select the one with the highest lastSuccessVersion among all surviving BE replicas, so as to recover as much data as possible. You should only open it in the emergency scenarios mentioned above, only used for temporary recovery queries. Note that, this variable conflicts with the a variable, when the a variable is not -1, this variable will not work.
-
default_password_lifetime
Default password expiration time. The default value is 0, which means no expiration. The unit is days. This parameter is only enabled if the user's password expiration property has a value of DEFAULT. like:
CREATE USER user1 IDENTIFIED BY "12345" PASSWORD_EXPIRE DEFAULT;
ALTER USER user1 PASSWORD_EXPIRE DEFAULT; -
password_history
The default number of historical passwords. The default value is 0, which means no limit. This parameter is enabled only when the user's password history attribute is the DEFAULT value. like:
CREATE USER user1 IDENTIFIED BY "12345" PASSWORD_HISTORY DEFAULT;
ALTER USER user1 PASSWORD_HISTORY DEFAULT; -
validate_password_policy
Password strength verification policy. Defaults to
NONE
or0
, i.e. no verification. Can be set toSTRONG
or2
. When set toSTRONG
or2
, when setting a password via theALTER USER
orSET PASSWORD
commands, the password must contain any of "uppercase letters", "lowercase letters", "numbers" and "special characters". 3 items, and the length must be greater than or equal to 8. Special characters include:~!@#$%^&*()_+|<>,.?/:;'[]{}"
. -
group_concat_max_len
For compatible purpose. This variable has no effect, just enable some BI tools can query or set this session variable sucessfully.
-
rewrite_or_to_in_predicate_threshold
The default threshold of rewriting OR to IN. The default value is 2, which means that when there are 2 ORs, if they can be compact, they will be rewritten as IN predicate.
-
group_by_and_having_use_alias_first
Specifies whether group by and having clauses use column aliases rather than searching for column name in From clause. The default value is false.
-
enable_file_cache
Set wether to use block file cache, default false. This variable takes effect only if the BE config enable_file_cache=true. The cache is not used when BE config enable_file_cache=false.
-
file_cache_base_path
Specify the storage path of the block file cache on BE, default 'random', and randomly select the storage path configured by BE.
-
enable_inverted_index_query
Set wether to use inverted index query, default true.
-
topn_opt_limit_threshold
Set threshold for limit of topn query (eg. SELECT * FROM t ORDER BY k LIMIT n). If n <= threshold, topn optimizations(runtime predicate pushdown, two phase result fetch and read order by key) will enable automatically, otherwise disable. Default value is 1024.
-
drop_table_if_ctas_failed
Controls whether create table as select deletes created tables when a insert error occurs, the default value is true.
-
show_user_default_role
Controls whether to show each user's implicit roles in the results of
show roles
. Default is false. -
use_fix_replica
TipsThis configuration is supported since the Apache Doris 1.2 version
Use a fixed replica to query. replica starts with 0 and if use_fix_replica is 0, the smallest is used, if use_fix_replica is 1, the second smallest is used, and so on. The default value is -1, indicating that the function is disabled.
-
dry_run_query
If set to true, for query requests, the actual result set will no longer be returned, but only the number of rows, while for load and insert, the data is discarded by sink node, no writing happens. The default is false.
This parameter can be used to avoid the time-consuming result set transmission when testing a large number of data sets, and focus on the time-consuming underlying query execution.
mysql> select * from bigtable;
+--------------+
| ReturnedRows |
+--------------+
| 10000000 |
+--------------+ -
enable_parquet_lazy_materialization
Controls whether to use lazy materialization technology in parquet reader. The default value is true.
-
enable_orc_lazy_materialization
Controls whether to use lazy materialization technology in orc reader. The default value is true.
-
enable_strong_consistency_read
Used to enable strong consistent reading. By default, Doris supports strong consistency within the same session, that is, changes to data within the same session are visible in real time. If you want strong consistent reads between sessions, set this variable to true.
-
truncate_char_or_varchar_columns
Whether to truncate char or varchar columns according to the table's schema. The default is false.
Because the maximum length of the char or varchar column in the schema of the table is inconsistent with the schema in the underlying parquet or orc file. At this time, if the option is turned on, it will be truncated according to the maximum length in the schema of the table.
-
jdbc_clickhouse_query_final
Whether to add the final keyword when using the JDBC Catalog function to query ClickHouse,default is false.
It is used for the ReplacingMergeTree table engine of ClickHouse to deduplicate queries.
-
enable_unique_key_partial_update
This field is supported since version 2.0.2.
Whether to enable partial columns update semantics for native insert into statement, default is false. Please note that the default value of the session variable enable_insert_strict
, which controls whether the insert statement operates in strict mode, is true. In other words, the insert statement is in strict mode by default, and in this mode, updating non-existing keys in partial column updates is not allowed. Therefore, when using the insert statement for partial columns update and wishing to insert non-existing keys, you need to set enable_unique_key_partial_update
to true and simultaneously set enable_insert_strict
to false.
-
enable_cooldown_replica_affinity
Users can choose whether to use the cooled copy for scanning first, which defaults to true
Supplementary instructions on statement execution timeout controlβ
-
Means of control
Currently doris supports timeout control through
variable
anduser property
two systems. Both includeqeury_timeout
andinsert_timeout
. -
Priority
The order of priority for timeout to take effect is:
session variable
>user property
>global variable
>default value
When a variable with a higher priority is not set, the value of the next priority is automatically adopted.
-
Related semantics
query_timeout
is used to control the timeout of all statements, andinsert_timeout
is specifically used to control the timeout of the INSERT statement. When the INSERT statement is executed, the timeout time will takeThe maximum value of
query_timeout
andinsert_timeout
.query_timeout
andinsert_timeout
inuser property
can only be specified by the ADMIN user for the target user, and its semantics is to change the default timeout time of the specified user, and it does not havequota
semantics. -
Precautions
The timeout set by
user property
needs to be triggered after the client reconnects.