Skip to main content
Skip to main content

Automated Service Startup

Automatic service start

This document describes how to configure the automatic pull-up of the Doris cluster to ensure that services are not pulled up in time after service breaks down due to special circumstances in the production environment.

The automatic pull-up service of FE and BE must be configured after the Doris cluster is completely set up.

Systemd Configures the Doris service​

For details about systemd usage and parameter parsing, see here

sudo permission control​

sudo permissions are required to control the doris service using systemd. To ensure the minimum granularity of sudo permission assignment, you can assign the systemd control permission of doris-fe and doris-be services to specified non-root users. Configure the systemctl management permission for doris-fe and doris-be in visudo.

Cmnd_Alias DORISCTL=/usr/bin/systemctl start doris-fe,/usr/bin/systemctl stop doris-fe,/usr/bin/systemctl start doris-be,/usr/bin/systemctl stop doris-be

## Allow root to run any commands anywhere
root    ALL=(ALL)       ALL
doris   ALL=(ALL)       NOPASSWD:DORISCTL

Configuration procedure​

  1. You should config the "JAVA_HOME" variable in the config file, both fe.conf and be.conf, or you can't use the command "systemctl start" to start doris

    echo "JAVA_HOME=your_java_home" >> /home/doris/fe/conf/fe.conf
    echo "JAVA_HOME=your_java_home" >> /home/doris/be/conf/be.conf

  2. Download the doris-fe.service file: doris-fe.service

  3. The details of doris-fe.service are as follows:

    # Licensed to the Apache Software Foundation (ASF) under one
    # or more contributor license agreements.  See the NOTICE file
    # distributed with this work for additional information
    # regarding copyright ownership.  The ASF licenses this file
    # to you under the Apache License, Version 2.0 (the
    # "License"); you may not use this file except in compliance
    # with the License.  You may obtain a copy of the License at
    #
    #   http://www.apache.org/licenses/LICENSE-2.0
    #
    # Unless required by applicable law or agreed to in writing,
    # software distributed under the License is distributed on an
    # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
    # KIND, either express or implied.  See the License for the
    # specific language governing permissions and limitations
    # under the License.

    [Unit]
    Description=Doris FE
    After=network-online.target
    Wants=network-online.target

    [Service]
    Type=forking
    User=root
    Group=root
    LimitCORE=infinity
    LimitNOFILE=200000
    Restart=on-failure
    RestartSec=30
    StartLimitInterval=120
    StartLimitBurst=3
    KillMode=none
    ExecStart=/home/doris/fe/bin/start_fe.sh --daemon 
    ExecStop=/home/doris/fe/bin/stop_fe.sh

    [Install]
    WantedBy=multi-user.target

Matters needing attention​

  • ExecStart and ExecStop are configured based on actual fe paths

  1. Download the doris-be.service file : doris-be.service

  2. The details of doris-be.service are as follows: 

    # Licensed to the Apache Software Foundation (ASF) under one
    # or more contributor license agreements.  See the NOTICE file
    # distributed with this work for additional information
    # regarding copyright ownership.  The ASF licenses this file
    # to you under the Apache License, Version 2.0 (the
    # "License"); you may not use this file except in compliance
    # with the License.  You may obtain a copy of the License at
    #
    #   http://www.apache.org/licenses/LICENSE-2.0
    #
    # Unless required by applicable law or agreed to in writing,
    # software distributed under the License is distributed on an
    # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
    # KIND, either express or implied.  See the License for the
    # specific language governing permissions and limitations
    # under the License.

    [Unit]
    Description=Doris BE
    After=network-online.target
    Wants=network-online.target

    [Service]
    Type=forking
    User=root
    Group=root
    LimitCORE=infinity
    LimitNOFILE=200000
    Restart=on-failure
    RestartSec=30
    StartLimitInterval=120
    StartLimitBurst=3
    KillMode=none
    ExecStart=/home/doris/be/bin/start_be.sh --daemon
    ExecStop=/home/doris/be/bin/stop_be.sh

    [Install]
    WantedBy=multi-user.target

Matters needing attention​

  • ExecStart and ExecStop are configured based on actual be paths

  1. Service configuration

    Place doris-fe.service and doris-be.service in the /usr/lib/systemd/system directory

  2. Set self-start

    After you add or modify the configuration file, you need to reload it

    systemctl daemon-reload

    Set the start, the essence is in the/etc/systemd/system/multi - user. Target. Wants/add service file link

    systemctl enable doris-fe
    systemctl enable doris-be

  3. Service initiation

    systemctl start doris-fe
    systemctl start doris-be

Supervisor configures the Doris service​

Supervisor Specific use and parameter analysis can be referred to here

Supervisor configuration automatically pulls up the supervisor configuration. You can install the supervisor directly using the yum command or manually using pip. The pip manual installation process is complicated, and only the yum deployment mode is displayed.Manual deployment refer to [here] (http://supervisord.org/installing.html) for installation deployment.

Configuration procedure​

  1. yum Install supervisor

    yum install epel-release
    yum install -y supervisor

  2. Start the service and view the status

    systemctl enable supervisord # bootstrap
    systemctl start supervisord # Start the supervisord service
    systemctl status supervisord # Check the supervisord service status
    ps -ef|grep supervisord # Check whether the supervisord process exists

  3. Configure BE process management

    Modify the start_be.sh script remove the last symbol &

    vim /path/doris/be/bin/start_be.sh
    Take this code : nohup $LIMIT ${DORIS_HOME}/lib/palo_be "$@" >> $LOG_DIR/be.out 2>&1 </dev/null &
    Be changed to : nohup $LIMIT ${DORIS_HOME}/lib/palo_be "$@" >> $LOG_DIR/be.out 2>&1 </dev/null

    Create a supervisor process management configuration file for the BE

    vim /etc/supervisord.d/doris-be.ini

    [program:doris_be]      
    process_name=%(program_name)s      
    directory=/path/doris/be/be
    command=sh /path/doris/be/bin/start_be.sh
    autostart=true
    autorestart=true
    user=root
    numprocs=1
    startretries=3
    stopasgroup=true
    killasgroup=true
    startsecs=5
    #redirect_stderr = true
    #stdout_logfile_maxbytes = 20MB
    #stdout_logfile_backups = 10
    #stdout_logfile=/var/log/supervisor-palo_be.log

  4. Configure FE process management

    Modify the start_fe.sh script remove the last symbol &

    vim /path/doris/fe/bin/start_fe.sh 
    Take this code : nohup $LIMIT $JAVA $final_java_opt org.apache.doris.PaloFe ${HELPER} "$@" >> $LOG_DIR/fe.out 2>&1 </dev/null &
    Be changed to : nohup $LIMIT $JAVA $final_java_opt org.apache.doris.PaloFe ${HELPER} "$@" >> $LOG_DIR/fe.out 2>&1 </dev/null

    Create a supervisor process management configuration file for FE

    vim /etc/supervisord.d/doris-fe.ini

    [program:PaloFe]
    environment = JAVA_HOME="/usr/local/java"
    process_name=PaloFe
    directory=/path/doris/fe
    command=sh /path/doris/fe/bin/start_fe.sh
    autostart=true
    autorestart=true
    user=root
    numprocs=1
    startretries=3
    stopasgroup=true
    killasgroup=true
    startsecs=10
    #redirect_stderr=true
    #stdout_logfile_maxbytes=20MB
    #stdout_logfile_backups=10
    #stdout_logfile=/var/log/supervisor-PaloFe.log

  5. Configure Broker process management

    Modify the start_broker.sh script remove the last symbol &

    vim /path/apache_hdfs_broker/bin/start_broker.sh
    Take this code : nohup $LIMIT $JAVA $JAVA_OPTS org.apache.doris.broker.hdfs.BrokerBootstrap "$@" >> $BROKER_LOG_DIR/apache_hdfs_broker.out 2>&1 </dev/null &
    Be changed to : nohup $LIMIT $JAVA $JAVA_OPTS org.apache.doris.broker.hdfs.BrokerBootstrap "$@" >> $BROKER_LOG_DIR/apache_hdfs_broker.out 2>&1 </dev/null

    Create the supervisor process management profile for the Broker

    vim /etc/supervisord.d/doris-broker.ini

    [program:BrokerBootstrap]
    environment = JAVA_HOME="/usr/local/java"
    process_name=%(program_name)s
    directory=/path/apache_hdfs_broker
    command=sh /path/apache_hdfs_broker/bin/start_broker.sh
    autostart=true
    autorestart=true
    user=root
    numprocs=1
    startretries=3
    stopasgroup=true
    killasgroup=true
    startsecs=5
    #redirect_stderr=true
    #stdout_logfile_maxbytes=20MB
    #stdout_logfile_backups=10
    #stdout_logfile=/var/log/supervisor-BrokerBootstrap.log

  6. First determine whether the Doris service is stopped, then use supervisor to automatically pull up Doris, and then determine whether the process starts normally

    supervisorctl reload # Reload all the Supervisor configuration files
    supervisorctl status # Check the supervisor status and verify that the Doris service process starts normally

    兢他命什 : 
    supervisorctl start all # supervisorctl start It is capable of opening processes
    supervisorctl stop doris-be # The process is supervisorctl stop

Matters needing attention:​

  • If the supervisor installed using yum starts, an error occurs: pkg_resources.DistributionNotFound: The 'supervisor==3.4.0' distribution was not found
supervisor installed directly using the yum command only supports python2,Therefore, the file contents in /usr/bin/supervisorctl and /usr/bin/supervisorctl should be changed at the beginning Change #! /usr/bin/python to #! /usr/bin/python2, python2 must be installed
  • If the supervisor is configured to automatically pull up the Doris process, if the BE node breaks down due to abnormal factors on Doris, the error stack information that should be output to be.out will be intercepted by the supervisor. We need to look it up in supervisor's log for further analysis.
Join DiscussionOn This Page
ASF
Resources
Community
Join the community
Copyright Β© 2024 The Apache Software Foundation,Licensed under the Apache License, Version 2.0. Apache, Doris, Apache Doris, the Apache feather logo and the Apache Doris logo are trademarks of The Apache Software Foundation.